【5.28更新v1.1_beta8】4.3 3827资源整合

余烟

    5.28更新   XPEnology_3827已更新至XPEnology_3827-pre-v1.1_beta8 ，此版能获取真实mac地址。直接用此版的朋友就不需要再修改mac地址了。下载地址XPEnology_3827-pre-v1.1_beta8

   从4.3 3810到5.0 4458反复几次，最终回到4.3 3827.此版本启动速度快，个人感觉最好用。现将坛子里优秀资源集中在此，方便自己同时也方便有需要的朋友。
  本帖软件版本基于xpenology论坛Trantor的 XPEnology_3827-pre-v1.1_beta7，驱动自己看。

v8 (11/05/2014)

- Use real mac adresses (thx gnotboot for the tip)
- 3827 update2 is not installed but included and patched*

- Add Marvell 9230 chip support (dawicontroller, thx Symbiot78)
- Add VIA Velocity network support
- Add sound support
- Add bluetooth support
- Add wifi drivers (backport all drivers from kernel 3.12.1)
- Add multimedia dvb drivers (include all drivers available in kernel sources as module)
- Add a second kernel with pata_legacy built-in driver
- Update e1000e driver to v3.0.4
- Update r8168 driver to v8.038
- Update mpt2sas driver to v18

* Included Update2 will only work if you make a new install and disable volume creation in Syno Assistant.
Otherwise just follow the how to provided above.
I will make a patch to prevent this in the future.

v7 (24/02/2014)

- Update to 4.3-3827 build
- Synology DX510 is properly detected
- Temporarily removed pata_legacy

v6 (09/02/2014)

- Fix grub error 17 (introduced in beta5)
- Add Mellanox Technologies 10Gbit Ethernet support
- Add QLOGIC QLCNIC 1/10Gb Converged Ethernet support
- Add RocketRAID 2640x4 support (rr26xx driver)

v5 (20/01/2014)

- Add VIA CPU support (CENTAUR)
- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)
- Add Brocade 1010/1020 10Gb support
- iSCSI (block level) works in IET mode (change lio to iet in synoinfo.cfg)
- iSCSI (regular) works in LIO mode
- NFS working
- CIFS mount point working
- Include bootstrap ipkg setup script (/root.profile is already modified) : after setup just log to ssh and type :
sh syno-i686-bootstrap_1.2-7_i686.xsh
reboot, log again to ssh and type
ipkg update


v4 (29/12/2013)

- You can now install DSM on drives connected to a SCSI/SAS controller
- Fix the volume "broken" issue when DSM is installed on a SCSI/SAS controller
- Fix NFS support
- Update megaraid_sas driver to the latest version
- Modify the way XPEnology's modules are loaded in ramdisk
- Include modules from previous beta
- Add PS2 keyboard support

v3 (21/12/2013)

- Add more drivers for KVM / virtio / virtualization support
- Add patched r8169 driver (realtek chips which are not working with the r8168 driver will work with this one)
- Add latest version of sk98lin driver (Marvell Yukon / SysKonnect SK-98xx/SK-95xx support)
- Update Broadcom bnx2 driver to latest version


v2 (05/12/2013)

- AX88179 Gigabit Ethernet USB 3.0
- Latest driver version for RocketRAID 3xxx/4xxx Controller
- Latest (aacraid) driver version for Adaptec
- Support XFS filesystem (no idea if DSM will automount this)


v1

- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)


SCSI
----

Highpoint Rocketraid 2720SGL
LSI mpt2sas v17
Adaptec aacraid
Intel C600 Series Chipset SAS


NETWORK
-------

3Com 3c590/3c900, 3cr990
Alteon AceNIC/3Com 3C985/NetGear GA620
QLogic QLA3XXX
SiS 900/7016 SiS190/SiS191


USB
---

USB to serial / Prolific 2303 driver


PATA
----

ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH)
CMD / Silicon Image 680 PATA (PATA_SIL680)
SiS PATA (PATA_SIS)
VIA PATA (PATA_VIA)
Winbond SL82C105 PATA (PATA_WINBOND)
Legacy PATA support (PATA_LEGACY)

下载地址：XPEnology_3827-pre-v1.1_beta7(此链接已更新为beta8,第一步可以省略了）
   1:用img mac editor(sancome出品)打开synoboot-3827-pre-v1.1_v7.img修改成本机mac ,序列号看个人需要。



  2:  5.0无损降级（有风险），全新安装请无视。步骤nas开启ssh,  用WinSCP连接nas,修改/etc.defaults/VERSION这个文件
    档案内容如下：
majorversion="5"
minorversion="0"
buildphase="release"
buildnumber="4458"
smallfixnumber=2
builddate=2014/04/03
     把5改成2  4458改成1000保存

   进nas,查看系统信息，如果版本号变成修改后的就成功了。nas关机，把第一步修改好的映像文件用 win32diskimager写入启动u盘。
   3：安装4.3系统。 nas开机，此步为网页安装。浏览器打开nas ip,不出意外会提示有转移，选择只保留我的文件，全新安装。选择第一步XPEnology_3827-pre-v1.1_beta7压缩包里的beta7.pat确定，安装完成。   
   4：安装video station套件。下载video station 1.2-0423，此版本为官方最后一个原生支持ac3和dts解码。且cpu占用小。打开套件中心，手动安装。官方下载：video station 1.2-0423
   
   5：系统更新至update 2.打开系统更新，发现状态栏为：dsm 5.0-4482版本可下载。所以手动下载+计划任务更新行不通了。就只能手动更新了。一定要严格按步骤来，错一步就会报错。
             ①：下载update2升级包

游客，如果您要查看本帖隐藏内容请回复

             ②：更新面板里面选择手动更新，浏览文件，确定，这时候千万别下一步。                        
             ③：打开ssh和telnet,win7 cmd连接.依次输入两条命令：
                          

1. sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1

复制代码

1. mv /autoupd@te.info1 /autoupd@te.info

复制代码

             ④：系统更新里，点下一步。完成。







     6:修改XPEnology 4.3 logo。（可选)                                      原精华帖 修改XPEnology_4.3登录界面XPEnology 4.3 logo的方法 （_爱仩钌伱）
             原作中使用的是命令方式，这里我们使用上面已经下载的winscp
             下载原版的logo文件夹(注意，解压后有两层目录，我们用到的是最里面的login文件夹）
              winscp连接nas,将下载的login文件夹覆盖/usr/syno/synoman/webman/resources/images/

余烟

暂时就这样，不足之处还请指正

会跳舞的驴

支持一个······

fubin99

不错期待

qjzyyhzr

谢谢分享！

stoneychen

努力学习，天天向上，感谢分享

kingtyj

学习一下了

kingtyj

剩下的还没出来？

xumin209

路过学习了，谢谢分享

minggpt

学习一下了

liusong

谢谢楼主分享。

nonzhe

非常好 的帖子啊

linuxsn

谢谢分享

wqxxsjc

支持啊，订起来

剑剑

路过看看。

zbigbird

感谢楼主的无私分享

fswwen

在等beta8！

海贼无双

谢谢分享

chase

Venue 11 Pro

yougetsle

谢谢分享！