Trantor大的4.3-3827完整版出来了，这个应该是现在最稳定的
本帖最后由 laoyangjp 于 2014-2-24 08:22 编辑v7 (24/02/2014)
- Update to 4.3-3827 build
- Synology DX510 is properly detected
- Temporarily removed pata_legacy
v6 (09/02/2014)
- Fix grub error 17 (introduced in beta5)
- Add Mellanox Technologies 10Gbit Ethernet support
- Add QLOGIC QLCNIC 1/10Gb Converged Ethernet support
- Add RocketRAID 2640x4 support (rr26xx driver)
v5 (20/01/2014)
- Add VIA CPU support (CENTAUR)
- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)
- Add Brocade 1010/1020 10Gb support
- iSCSI (block level) works in IET mode (change lio to iet in synoinfo.cfg)
- iSCSI (regular) works in LIO mode
- NFS working
- CIFS mount point working
- Include bootstrap ipkg setup script (/root.profile is already modified) : after setup just log to ssh and type :
sh syno-i686-bootstrap_1.2-7_i686.xsh
reboot, log again to ssh and type
ipkg update
v4 (29/12/2013)
- You can now install DSM on drives connected to a SCSI/SAS controller
- Fix the volume "broken" issue when DSM is installed on a SCSI/SAS controller
- Fix NFS support
- Update megaraid_sas driver to the latest version
- Modify the way XPEnology's modules are loaded in ramdisk
- Include modules from previous beta
- Add PS2 keyboard support
v3 (21/12/2013)
- Add more drivers for KVM / virtio / virtualization support
- Add patched r8169 driver (realtek chips which are not working with the r8168 driver will work with this one)
- Add latest version of sk98lin driver (Marvell Yukon / SysKonnect SK-98xx/SK-95xx support)
- Update Broadcom bnx2 driver to latest version
v2 (05/12/2013)
- AX88179 Gigabit Ethernet USB 3.0
- Latest driver version for RocketRAID 3xxx/4xxx Controller
- Latest (aacraid) driver version for Adaptec
- Support XFS filesystem (no idea if DSM will automount this)
v1
- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)
SCSI
----
Highpoint Rocketraid 2720SGL
LSI mpt2sas v17
Adaptec aacraid
Intel C600 Series Chipset SAS
NETWORK
-------
3Com 3c590/3c900, 3cr990
Alteon AceNIC/3Com 3C985/NetGear GA620
QLogic QLA3XXX
SiS 900/7016 SiS190/SiS191
USB
---
USB to serial / Prolific 2303 driver
PATA
----
ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH)
CMD / Silicon Image 680 PATA (PATA_SIL680)
SiS PATA (PATA_SIS)
VIA PATA (PATA_VIA)
Winbond SL82C105 PATA (PATA_WINBOND)
Legacy PATA support (PATA_LEGACY)
沙发，正在升级中 给个地址吧.... 同求啊~； 同求地址啊 哪里有下载？ 感谢分享~ 地址呢？ 沙发，___!!!!!!! 太稳定了，地址忘发了吗？ http://xpenology.trantor.be/beta/ hyper v能支持吗 有下载地址吗 感谢分享。 感谢信息分享~ 已经安装，休眠正常。O大的也出了，不过信息中提到不能休眠，没试，其他同学可以折腾一下。 本帖最后由 hehe8899 于 2014-2-24 12:28 编辑
正在下载... 有空会去试试 fyngd 发表于 2014-2-24 12:09
已经安装，休眠正常。O大的也出了，不过信息中提到不能休眠，没试，其他同学可以折腾一下。 ...
你好，是不是需要换MAC及SN号？能帮忙说下修改的行号，谢谢！ wjssh 发表于 2014-2-24 13:46
你好，是不是需要换MAC及SN号？能帮忙说下修改的行号，谢谢！
需要网络唤醒的话就修改MAC，如果同一个局域网中有多台黑群晖的话就要修改SN。
页:
[1]
2